Necessary parts for Day and Night roller blinds (RM 18)
Step 1 - (Only for blinds with ordered locking cord). Pass the locking cord into the middle hole of the caps (3) and tie it in a knot on one side to secure it.
Step 2 - If you mount the blind on a wall or ceiling, secure the caps (3) with screws (5) and dowels. If you mount it on the frame, secure the caps (3) with screws (5).
Step 3 - Click the roller blind on the already installed caps (1).
Step 4 - Place the lower profile attached at the end of the fabric in the special mounting plates for fabric Day and Night (1).
Step 5 - Put the lower weight in the fabric (7).
Step 6 – (Only for blinds with ordered locking cord). Pass the cord through the round holes (8) on the lower fabric weight (7).
Step 7 – (Only for blinds with ordered locking cord). Loosen the blind and install the plates (2) on the window frame at both ends under the lower weight.
Step 8 – (Only for blinds with ordered locking cord).Pass the locking cord through the plates and tighten the barrels (2).
Step 9 – (Only for blinds with ordered locking cord). Cut the rest of the cord.
Step 10 - Place the stoppers (4) between the balls of the control cord. They serve as a limiter on the movement of the blind.
Blind control with an operative cord
