Necessary parts for Roller RM18
Step 1 - (Only for Rollers with ordered locking cord). Put the locking cord (3) through the middle hole of the caps (1) and tie it in a knot on one side to secure it.
Step 2 - If you mount the blind on a wall or a ceiling secure the caps (1) with screws (5) and dowels. If you mount the blind on the joinery secure the caps (1) with screws (5).
Step 3 - Click the Roller blind on the already installed caps (1).
Step 4 – (Only for Rollers with ordered locking cord). Put the locking cord (3) through the round holes in the lower profile.
Step 5 – (Only for Rollers with ordered locking cord). Loosen the blind and install the plates (2) at both ends under the lower profile.
Step 6 – (Only for Rollers with ordered locking cord). Pass the locking cord (3) through the plates and tighten the barrels (2).
Step 7 – (Only for Rollers with ordered locking cord). Cut the rest of the cord.
Step 8 - Place the stoppers (4) between the balls of the control cord. They serve as a limiter on the movement of the blind.
Necessary parts for Roller RM25
Step 1 - If you mount the blind on a wall or a ceiling secure the caps (1) with screws (2) and dowels. If you mount the blind on the joinery secure the caps (1) with screws (2).
Step 2 - Click the Roller blind on the already installed caps (1).
Necessary parts for Roller RM30
Step 1 - If you mount the blind on a wall or a ceiling secure the metal caps (1) with screws (2) and dowels. If you mount the blind on the joinery secure the caps (1) with screws (2).
Step 2 - Insert the Roller blind on the already installed metal caps (1) as shown in the photo below.
